How To Fix Canon Printer MP237 Error Code 5B00 7x Blink

Canon Printer Error 5B00

This is a guide about how to fix Canon Printer MP237 with error code 5B00 on the monitor screen and 7x blinking code on the printer indicator.

Error 5B00 on Canon MP237 printer indicating that the printer is asking us to reset it. The steps to reset the printer are as follows:

  1. Make sure the printer driver has been installed properly.
  2. Turn off your printer by pressing the power button, let it completely stopped working.
  3. Remember, the power cable is still in a state connected to the mains.
  4. Press the RESUME button for approximately 2 seconds
  5. After that, press the POWER button until the green light on (when pressing the POWER button, Resume button not released yet)
  6. Then release the RESUME button, but do not release the POWER button.
  7. While the POWER button is pressed, press the Resume button 5 times. The indicator light will flash alternately orange and green with the last blink is orange. (do not press 4x, because the printer will stop completely, but it is temporary)
  8. Release both buttons (POWER and RESUME) simultaneously.
  9. LED indicator will blink briefly then will flash GREEN.
  10. The computer will detect the new device, just ignore it
  11. This situation indicates that the printer is in a state MP237 SERVICE MODE and ready to be reset.

The next step is to reset the printer, you must have the resetter software first.

  1. Download Resetter Software (Service Tool) for Canon printer MP237 [DOWNLOAD HERE]
  2. Extract Resetter Canon printer MP237 .
  3. Prepare 2 pieces of paper in the printer (to print at the time the reset process).
  4. Run the application (Service Tool) Canon Printer MP237
  5. Click on the order number of applications in the following figure:

Canon Printer Service Tool

There will print one page with the words “D = 000.0” after you click on No. 1 and will print one more time after the last click is click on no.3

After the Turn off the printer and turn it back on.

Reset Canon MP237 was successful ….

Note: if there is a failure during reset the printer, then try to changed the order of steps.

Goodluck 🙂

Search term to this post: canon mp237 support code error 5b00, canon printer mp 237 error code 5b00, error code 5b00 canon mp237

Leave a Reply